Position the Panels
Align the panel with your marked lines on the wall. Press firmly to ensure the adhesive bonds well.
Secure the Panels
For additional security, you can use nails or screws to hold the panels in place while the adhesive sets. Use a nail gun or screwdriver to insert nails or screws along the edges and at intervals across the panel. Make sure the fasteners are flush with the panel surface.
Repeat the Process
Continue to apply adhesive and position each panel, ensuring they are tightly butted together. Check alignment with a level as you go to maintain a straight installation.
Finishing Touches
Fill Gaps and Seams
If there are any gaps or seams between the panels, use caulk to fill them in. This will give the installation a seamless appearance.
Clean Up
Remove any excess adhesive or debris from the installation area. Clean the surface of the panels with a damp cloth if necessary.
